Anping County Wanhai Metal Products Co.,Ltd. manufacture the satisfied quality and the complete range of stainless steel wire mesh, including stainless steel square wire mesh, stainless steel crimped style wire mesh, stainless steel herringbone style wire mesh and stainless steel wire mesh Dutch weave.
Stainless steel is wear-resisting, heat-resisting , acid-resisting and corrosion resisting .Just because of these characteristics, the wire mesh made of stainless steel is extensively used in mining, chemical industry, food industry and pharmaceutical industry.
Our Stainless Steel Wire Mesh products are generally made of stainless steel 302, 304, 316, 316L, 310, 430 etc. We produce wire cloth in all kinds of forms. The weaving is determined according to our customers, specific requirements, such as the material, the wire diameter, the size of the mesh, width and length.
Plain weave: This is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.
Specification List of Stainless Steel Plain Weave Wire Mesh
| Mesh/Inch | Wire Diameter | Aperture | Open Area | Weight(LB) /100 Square Foot | ||
| Inch | MM | Inch | MM | |||
| 1×1 | .080 | 2.03 | .920 | 23.37 | 84.6 | 41.1 |
| 2X2 | .063 | 1.60 | .437 | 11.10 | 76.4 | 51.2 |
| 3X3 | .054 | 1.37 | .279 | 7.09 | 70.1 | 56.7 |
| 4X4 | .063 | 1.60 | .187 | 4.75 | 56.0 | 104.8 |
| 4X4 | .047 | 1.19 | .203 | 5.16 | 65.9 | 57.6 |
| 5X5 | .041 | 1.04 | .159 | 4.04 | 63.2 | 54.9 |
| 6X6 | .035 | .89 | .132 | 3.35 | 62.7 | 48.1 |
| 8X8 | .028 | .71 | .097 | 2.46 | 60.2 | 41.1 |
| 10X10 | .025 | .64 | .075 | 1.91 | 56.3 | 41.2 |
| 10X10 | .020 | .51 | .080 | 2.03 | 64.0 | 26.1 |
| 12X12 | .023 | .584 | .060 | 1.52 | 51.8 | 42.2 |
| 12X12 | .020 | .508 | .063 | 1.60 | 57.2 | 31.6 |
| 14X14 | .023 | .584 | .048 | 1.22 | 45.2 | 49.8 |
| 14X14 | .020 | .508 | .051 | 1.30 | 51.0 | 37.2 |
| 16X16 | .018 | .457 | .0445 | 1.13 | 50.7 | 34.5 |
| 18X18 | .017 | .432 | .0386 | .98 | 48.3 | 34.8 |
| 20X20 | .020 | .508 | .0300 | .76 | 36.0 | 55.2 |
| 20X20 | .016 | .406 | .0340 | .86 | 46.2 | 34.4 |
| 24X24 | .014 | .356 | .0277 | .70 | 44.2 | 31.8 |
| 30X30 | .013 | .330 | .0203 | .52 | 37.1 | 34.8 |
| 30X30 | .012 | .305 | .0213 | .54 | 40.8 | 29.4 |
| 30X30 | .009 | .229 | .0243 | .62 | 53.1 | 16.1 |
| 35X35 | .011 | .279 | .0176 | .45 | 37.9 | 29.0 |
| 40X40 | .010 | .254 | .0150 | .38 | 36.0 | 27.6 |
| 50X50 | .009 | .229 | .0110 | .28 | 30.3 | 28.4 |
| 50X50 | .008 | .203 | .0120 | .31 | 36.0 | 22.1 |
| 60X60 | .0075 | .191 | .0092 | .23 | 30.5 | 23.7 |
| 60X60 | .007 | .178 | .0097 | .25 | 33.9 | 20.4 |
| 70X70 | .0065 | .165 | .0078 | .20 | 29.8 | 20.8 |
| 80X80 | .0065 | .165 | .0060 | .15 | 23.0 | 23.2 |
| 80X80 | .0055 | .140 | .0070 | .18 | 31.4 | 16.9 |
| 90X90 | .005 | .127 | .0061 | .16 | 30.1 | 15.8 |
| 100X100 | .0045 | .114 | .0055 | .14 | 30.3 | 14.2 |
| 100X100 | .004 | .102 | .0060 | .15 | 36.0 | 11.0 |
| 100X100 | .0035 | .089 | .0065 | .17 | 42.3 | 8.3 |
| 110X110 | .0040 | .1016 | .0051 | .1295 | 30.7 | 12.4 |
| 120X120 | .0037 | .0940 | .0064 | .1168 | 30.7 | 11.6 |
| 150X150 | .0026 | .0660 | .0041 | .1041 | 37.4 | 7.1 |
| 160X160 | .0025 | .0635 | .0038 | .0965 | 36.4 | 5.94 |
| 180X180 | .0023 | .0584 | .0033 | .0838 | 34.7 | 6.7 |
| 200X200 | .0021 | .0533 | .0029 | .0737 | 33.6 | 6.2 |
| 250X250 | .0016 | .0406 | .0024 | .0610 | 36.0 | 4.4 |
| 270X270 | .0016 | .0406 | .0021 | .0533 | 32.2 | 4.7 |
| 300X300 | .0051 | .0381 | .0018 | .0457 | 29.7 | 3.04 |
| 325X325 | .0014 | .0356 | .0017 | .0432 | 30.0 | 4.40 |
| 400X400 | .0010 | .0254 | .0015 | .370 | 36.0 | 3.3 |
| 500X500 | .0010 | .0254 | .0010 | .0254 | 25.0 | 3.8 |
| 635X635 | .0008 | .0203 | .0008 | .0203 | 25.0 | 2.63 |
Twill weave: Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter. We can supply the mesh from 30 mesh to 500 mesh.
The specifications listed below are commonly required.
Specification List of Stainless Steel Twill Weave Wire Mesh
| Twill weave / Herringbone style / diagonal Weave | |
| Mesh/Inch | Wire Diameter |
| 30mesh | 0.45mm |
| 20mesh | 0.50mm |
| 40mesh | 0.35mm |
| 36mesh | 0.35mm |
| 35mesh | 0.32mm |
| 30x24mesh | 0.45mm |
Twill dutch weave: “Twill” indicates the warp and weft wires pass alternately above two and below two wires. “Dutch” refers to the use of a heavier warp wire diameter in conjunction with a lighter weft wire diameter. This weave shows a combination of twill and dutch weave.
Specification List of Stainless Steel Twill Dutch Weave Wire Mesh
| Mesh/Inch | Wire Diameter | Absolute Filtration Fineness µm | Nominal Filtration Fineness µm |
| 20×250 | .0098x.0079 | 110-120 | 98-105 |
| 30×360 | .0098x.0060 | 90-100 | 80-84 |
| 40×560 | .0070x.0040 | 70-75 | 47-52 |
| 120×400 | .0040x.0025 | 50-55 | 37-43 |
| 120×160 | .0040x.0025 | 40-45 | 28-32 |
| 80×700 | .0040x.0030 | 35-40 | 24-26 |
| 200×600 | .0024x.0018 | 28-32 | 19-21 |
| 165×800 | .0028x.0020 | 24-26 | 14-16 |
| 165×1400 | .0028x.0016 | 16-18 | 9-11 |
| 200×1400 | .0028x.0016 | 12-14 | 5-6 |
| 250×1400 | .0022x.0016 | 11-12 | 3-4 |
| 325×2300 | .0015x.0010 | 8-9 | 2-3 |
Plain dutch weave: Woven as a plain weave, but with the warp wires of greater diameter than the weft wires. The weft wires are very close together so that a so-called zero-mesh structure is formed; while the warp wires are thicker and arranged wider apart.
Specification List of Stainless Steel Plain Dutch weave Wire Mesh
| Mesh/Inch | Wire Diameter | Absolute Filtration Fineness µm | Nominal Filtration Fineness µm |
| 8X85 | .014X.0126 | 318 – 340 | 250 – 255 |
| 12X64 | .024X.0165 | 270 – 285 | 200 – 205 |
| 14X88 | .020X.013 | 225 – 245 | 150 – 155 |
| 20X150 | .0098X.007 | 155 – 165 | 100 – 105 |
| 24X100 | .015X.010 | 115 – 125 | 80 – 85 |
| 30X150 | .009X.007 | 95 – 100 | 65 – 70 |
| 40X200 | .007X.0055 | 65 – 70 | 55 – 60 |
| 50X250 | .0055X.0045 | 55 – 60 | 40 – 45 |
| 80X400 | .0049X.0028 | 43 – 48 | 35 – 40 |